Original size 1140x1600

KROOS — Connection. Neon Object

PROTECT STATUS: not protected
Longread translated automatically

«Svyaz» — a wall-mounted light object by KROOS, a brand of duckweed noodles. Two connected ‘O’s become a luminous colony: the outer contour unites the cells, while the inner lines preserve the signature design’s artistic plasticity. The lime glow transfers the brand identity into the space—to the dining table, the kitchen, or a small cafe.

big
Original size 1600x1100
big
Original size 1600x1100
big
Original size 1600x1100
Original size 1600x1100
Original size 1600x1100

OBJECT PARAMETERS
Wall art piece for interior decoration. Base dimensions: 640 × 350 mm; designed depth is approximately 40 mm. Horizontal orientation. Technology—NEON2, with a proposed light line width of 6 mm. The artistic outline consists of three closed trajectories totaling approximately 3.04 m. The locations of technical breaks and connections are determined by the manufacturer.
The base is clear acrylic, 5 mm thick, with a corner radius of R24 mm. Four mounting points are proposed: Ø5 mm holes with axes 20 mm from the edges. Expansion mounts allow for a 25 mm distance from the wall to the rear plane of the base; the diameter, position, and design of the mounts are coordinated with the fabricator.
Illumination—yellow-green, close to the signature lime KROOS. The precise available shade will be selected based on a production sample.

MANUFACTURE AND INSTALLATION The project anticipates wall mounting. In the visualization, the center of the object is located 155 cm from the floor, above the cantilever. The proposed cable exit is down on the right side from the rear; the power supply unit is placed underneath the cantilever while maintaining access to it. The voltage, power, and wire lengths are selected by the manufacturer. After selection, the production team verifies bend radii, spacing between lines, manufacturing tolerances, mounting points, and power supply. If necessary, the artistic contour will be adapted following agreement on any significant changes. Next, the base and mounting points are fabricated, the LED strip and diffuser are installed, and the connections and testing are completed. Vector PDF and SVG files at 1:1 scale have been prepared, including the light path trajectory, base mock-up, and spatial arrangement diagram. The thin line in the production PDF indicates the route axis, not the physical thickness of the diffuser.

PROJECT STATUS
3D visualizations in Blender are shown: light on, light off, and mounting on an interior wall. The physical sample has not yet been manufactured. The minimum estimated run is one unit; cost estimates and timelines are determined individually by production. Before manufacturing, the light emission color, technical contour adaptation, mounting, and electrical components must be agreed upon.
The project develops the proprietary logo of the KROOS brand. Main project: KROOS — Duckweed Noodles

KROOS — Connection. Neon Object
Project created at 26.10.2026
We use cookies to improve the operation of the website and to enhance its usability. More detailed information on the use of cookies can be fo...
Show more